![DOGCOM 5200mAh 6S 120C 22.2V LiPo Battery QS8 [DG]](http://qa.fpvfaster.com/cdn/shop/files/5200mAh120C6S22.2V_300x300.jpg?v=1719899749)
Diatone Mamba Stack Basic F405 Mini MK3.5 F4 Flight Controller + 40A 2-6S ESC 20x20mm
Fixed
- Add I2C function
- When you connect the USB, the receiver and OSD settings can be saved
- Increase the pad area
- LED signal selection （when Mamba Led sys avaiable）
- BEC short circuit protection
- TVS instant high voltage protection 30V
Update
- F405 models support F.prot（Most）
- Upgrade the anti-interference cable
- Use Typec（Most）
- The pad area of Mini flight controller (20×20) increased by 140%
Added
- Add self-recovery insurance to the receiver's 5V power supply
- Increase the camera VCC power supply pad
- Standard flight controller (30.5×30.5) adds spare pad
- Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference
FC Specifications
- MAMAB Basic F405MINI MK3.5
- MCU: 168MHz STM32F405RGT6
- GYRO: MPU6000
- Barometer: Yes
- OSD: Yes
- Blackbox: 16M Flash Memory
- Uarts: 5 Set
- ESC Soft: Dshot300/600
- Power Led: Yes
- LED Controller: BF LED
- RSSI: Yes
- Buzz: Yes
- Input: 2~6S Lipo (8.4~25.2V)
- TVS Protection: Yes
- BEC:3.3V 0.5A& 5V 2.5A
- MOUNTING: 20mm, M2
ESC Specifications
- MAMBA F40_BLS MINI
- INPUT VOLTAGE: 2~6S Lipo (8.4V~25V)
- CONTINUE CURRENT: 40A×4
- BURST CURRENT: 45A (10S)
- BEC: No
- Target：BLHeli_S CH40
- SOFT: Dshot300/600
- TVS Protection: Yes
- MOUNTING: 20mm, M3/M2
Supply :
- High-Frequency 470uF/35V ×1
- 8pin sh1.0 ×2
- 16AWG 60mm ×2
- AMASS Original XT60
