HappyModel Mobula6 2024 1S 65mm Ultra Light Micro FPV TinyWhoop

HappyModel Mobula6 2024 1S Micro FPV TinyWhoop ELRS

QAR 409,00
Save QAR 52

Quantity

Featured Products

TBS Crossfire Micro TX V2 Starter Set

QAR 406,00

TBS Crossfire Diversity Nano RX

QAR 176,00

Infinity 1400mAh 6S 150C 22.2V LiPo Battery XT60 [DG]

QAR 110,00

Matek M10Q-5883 GPS COMPASS Module

QAR 143,00

RadioMaster Bandit ExpressLRS 915MHz ELRS RF 1W Module TX

QAR 352,00 QAR 378,00

SUNLU PETG 3D Printer Filament 1.75mm 1KG

QAR 53,00

HappyModel Mobula6 2024 1S 65mm Ultra Light Micro FPV TinyWhoop ELRS

*Compatible Battery BETAFPV 300mAh 1S BT2.0

Features:

AIO Flight controller with Serial ELRS Receiver and 5.8G Openvtx
Super light 1S 65mm Brushless whoop only 17.7g
Equipment with the lightest brushless motors-SE0702 only 1.46gram
FX17-B 1/3 CMOS 800TVL Camera awesome footage
Smooth and powerful
Compatible with 1S Lipo/LIHV (GNB A30 Connector) or BT2.0 Connector
Note: Battery Not Included

Specifications:

Brand Name: Happymodel
Item Name: Mobula6 2024 1S 65mm ultra-light micro FPV Whoop
Wheelbase: 65mm
Size: 81mm*81mm*37mm
Weight: 17.7g

Receiver Option:

2.4GHz ExpressLRS Serial receiver

Spare Parts Specifications:

Motor	Mode: SE0702 KV28000 Configu-ration:9N12P Stator Diamter:7mm Stator Length:2mm Shaft Diameter:Φ1mm Motor Dimension(Dia.Len):Φ9.5mm14mm Weight(g):1.46g No.of Cells(Lipo):1S only
Propellers	Materials: PC Inch: 31mm Pitch: 0.8 in Weight: 0.21g Mount hole diameter: 1mm
Flight controller	SuperX ELRS AIO 5-IN-1 Flight controller MCU:STM32F411CEU6 (100MHZ, 512K FLASH) ,ESP32-PICO-D4 Sensor:BMI270(SPI connection) Mount hole size: 25.5mm*25.5mm Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Built-in Betaflight OSD(SPI Control) Built-in 5.8G OpenVTX 0mw~400mw (MSP control) Built-in UART ExpressLRS v3.0.0 Built-in voltage meter sensor, voltage meter scale 110 Built-in current meter sensor, current meter scale 1175
Onboard 4in1 ESC	Power supply: 1S LiPo/LiPo HV Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: Bluejay v0.19.2 Default protocol: DSHOT300 Recommend ESC Startup power value to min1100/max1200
Onboard Serial ExpressLRS receiver	Packet Rate option: 50Hz/150Hz/250Hz/500Hz ExpressLRS Firmware version: V3.0 RF Frequency: 2.4GHz Antenna: Enameled copper wire antenna Telemetry output Power: <12dBm Receiver protocol: Serial_based CRSF Compatible with ExpressLRS V3.x.x TX Module Could flash single ELRS receiver firmware by Wifi ExpressLRS firmware target: Generic ESP32 2.4Ghz Rx and VTx
Onboard 5.8g VTX	Firmware version: OPENVTX MSP VTX PIT Mode support Channels:40ch Transmitting Power: 0/RCE/25mw/100mw/400mw Power supply: DC 5V Current (5v): <650ma (400mw) Antenna connector: U.FL
FX17-B Camera	Model: FX17-B Image Sensor: 1/3" CMOS Horizontal Resolution: 800TVL FOV 150° Signal System: NTSC Net Weight: 1.5g Dimensions: L14mmW14mmH13mm

Package Includes:

Item Name	Qty
Mobula6 2024 1S 65mm whoop Drone Frame +Canopy	1
SuperX ELRS AIO 5-IN-1 Flight controller	1
SE0702 KV28000 brushless motor	4
Gemfan 1208-3 31mm tri-blade propellers(4cw+4ccw)	1
FX17-B 1/3 CMOS 800TVL camera NTSC 4:3	1
Onboard 5.8G 25mw~400mw VTX	1
Spare canopy	1
Propeller disassemble tool	1
Screwdriver	1