BetaFPV Meteor65 HD Whoop Quadcopter (1S) BNF FrSky
Meteor65 HD - Brand-New ultralight 1S HD Whoop Quadcopter on BETAFPV! - It will be your best choice no matter FPV flying or film shotting!
With brand-new F4 AIO 1S FC and upgraded 0802SE 22000KV Motor, Meteor65 HD is made in its best condition. Meteor65 HD is ultralight only 27.64g, which brings a stronger flight power. Adopted with the high-definition 1080P@60fps BETAFPV Nano HD Camera, this drone will lead you to a fairly clear image of every highlight moment. With this tiny whoop, you can easily achieve FPV freestyle tricks, while getting HD footage.
Bullet Point
- Meteor65 HD is an ultralight 1S HD drone, weighs only 27.46g without the battery. It gives pilots a good balance of weight and a nice punch on the 1S battery. It is powerful and flexible, small enough to avoid obstacles and achieve FPV actions.
- Come with brand-new F4 AIO 1S brushless FC, it integrated 25mW VTX, extremely save the drones' weight, no need for soldering, easy to install.
- Equipped with the upgraded 0802SE-22000KV motor, it further reduces the weight of Metror65 HD, improved the power effect, which gives you extreme power in your flight.
- Install with the lightest Betafpv Nano HD camera. Ultra definition with 1080P@60fps resolution, super-lightweight with 6.8g, complete functions with OSD, audio and record.
- Solder with the BT2.0 connector, which can provide a stable and powerful continuous current so that you can enjoy longer flight time.
Specification
- Item: Meteor65 HD
- Weight: 27.46g (without battery)
- FC: F4 AIO 1S Brushless FC
- Frame: Meteor65 Frame
- Motors: 0802SE 22000KV Motor
- Props: Gemfan 31mm 3-blades props 1.0mm shaft hole
- Camera: Betafpv Nano HD Camera
- Canopy: Canopy for Nano HD Camera
- Receiver Option: Frsky FCC/ Frsky LBT/ Futaba
- Batteries: BT2.0 300mah Battery
Flight Controller & ESC & VTX
The F4 AIO 1S FC is the First released 1S AIO FC on BETAFPV, it is perfectly suitable for a lighter 1S whoop drone, like Meteor65，Meteor75 or Meteor65 SE etc. It integrated with a Betaflight F411 processor FC, Betaflight OSD, SPI Frsky receiver, 1S 5A ESC and 25mw VTX. So that the drone could extremely save weight.
Nano HD Camera
Betafpv Nano HD Camera -This is the Lightest HD camera at the current market! Ultra definition with 1080p resolution, super-lightweight with 6.8g, complete functions with OSD, audio and record. Also, it adopts a 1/2.7" CMOS sensor and a 1.8mm lens for excellent latency. Best choice for all whoop drones like Meteor 65 / Beta65X / Beta75X / Beta85X. Discover the beauty of the world and record the wonderful life! With the high definition of 1080p resolution, you will have a fairly clear image.
The camera tilt is 30° which is un-switchable right now.
Motors
The 0802SE 22000KV Motor is a lightweight 1S motor. Upgraded from the 0802-22000KV motor, it is only 1.8g/pc but still maintains the awesome performance of power and thrust. It makes the perfect dynamic balance, which gives the drone more flexible and longer flying time. What's more, it used a PCB connector. More durable and easier to repair once disconnection.
Meteor65 Frame
Meteor65 frame is the most popular and colorful 65mm frame in the market. The lightest lower profile 65mm frame- Meteor65 frame is reduced 0.75g
to 3.14g only. The battery slot is closer to the center of gravity for a
smoother flying experience, and you will land on the motor screws instead of the battery. There are more options for colorful frames such as Beta-blue, mint-green, sakura-pink, mango-orange, etc.
BT2.0 Connector
BETAFPV exclusive designed BT2.0 connector has broken through the bottle-neck of PH2.0 connector. BT2.0 connector has decreased internal resistance of connector effectively allowing more current to be transferred, which means it supports 9A continuous current (15A burst). This means stronger power and longer flight time on 1S brushless drones while PH2.0 just supports 4.5A. You can enjoy more flight time without disturb of low voltage warning due to reducing voltage sag.
Package
- 1x Meteor65 HD Whoop Quadcopter (1S)
- 1x Spare 31mm 3-blades props (2CW+2CCW)
- 2x BT2.0 300mAh 1S Lipo batteries (Get More Battery Here: 300mAh BT2.0)
- 1x BT2.0-PH2.0 Adapter Cable
- 1x Spare Canopy
- 1x Screwdriver
